Epoxy Adhesives

We manufacture a wide variety of structural adhesives for industrial applications. Listed here are a number of stock products that include a broad range of properties. Many of our adhesives are tailored to specific uses and individual applications. If you have a requirement that cannot be fulfilled by these standard products, let us select or design a high performance adhesive that works for you.

Product Description

ES6209
A translucent, straw colored adhesive with a controlled flow viscosity for good surface wetting, yet minimum run-out from the joint.

ES6220
A fast setting green liquid adhesive with good adhesion to a variety of surfaces. Useful for bench assembly or quick repairs. Ideally suited for bonding situations where a fast cure at room temperature and good cures at low temperature are required.

ES6224
A black, very fast setting adhesive with good bonds to a variety of surfaces. The cured bonds are tough and durable, for excellent long term stability of the joints.

ES6228
ES6228 is a thin paste viscosity epoxy adhesive designed to provide good bonds to metal surfaces. A unique feature of ES6228 is its ability to bond to slightly oily metal surfaces. This is useful in situations where the complete removal of residual mill oil on metal surfaces is not possible. The thin paste consistency of ES6228 wets the metal surface well for good adhesion. This viscosity also provides some gap filling capabilities, so “close fitting” joints are adequate, and matched-metal joints are not required.

ES6238
A general purpose, aluminum filled, paste epoxy adhesive for metal repair and bonding and many other uses. This adhesive is recommended for general bonding, repair and gap filling on metal, cured plastics and other materials. It has excellent adhesion to metal, glass, wood and reinforced composite materials.

ES6240
ES6240 is a two component toughened epoxy adhesive with very good cured properties that provides excellent bonds to a variety of substrates. Its blend of high lap shear and T-Peel values allow superior performance in demanding bonding applications. ES6240 adheres very well to wood, metal, composites and some plastics. The bonded components exhibit tough and durable performance for long term stability in use.

ES6247
ES6247 is a high peel strength adhesive in the same family as our ES6240. ES6247 is a black epoxy adhesive with a 2 to 1 mix ratio by weight or volume. It has a pot life of 90 minutes, which allows easy assembly of large or complicated bonding jobs. ES6247 provides superior cured properties and tough, durable bonds to a variety of surfaces.

ES6249
A lightweight adhesive/patching/filler compound that is carvable when cured. It can be sanded in 2 to 3 hours, and is easily worked with hand tools.

ES6251-Board Bond
ES6251 is a two-component somewhat lighter epoxy system formulated for bonding together machinable board stock. ES6251 is easily sanded, and will match the surface contour of the machined and sanded board-stock master. ES6251 can be used to bond urethane and epoxy board stock, ranging from lightweight foam boards to high-density solid boards.

ES6259
A dark brown high strength paste adhesive that cures well in the presence of water. Excellent in high humidity conditions, ES6259 will even cure underwater for special situations.

ES6265
A tan high strength paste adhesive with very good high temperature resistance. ES6265 is a good candidate for applications where bond lines are exposed to elevated temperatures

ES6271, ES6272 & ES6279
A tough general purpose adhesive with excellent bonds to a wide variety of surfaces. ES6271 is Black, ES6272 is White, and ES6279 is the natural Tan version of this system. These are very versatile adhesives that combine ease of use with tough, high strength, impact resistant bonds for a broad range of applications.

ES6292
A tan paste epoxy adhesive intended for use in bonding composite parts and structural assemblies. ES6292 is a very tough adhesive, so it works well in applications where severe stresses and vibration are involved. It is not brittle when cured, and has very good resistance to peel forces. It has good thixotropy, and fills gaps in uneven bond lines without sagging or run out during cure. ES6292 performs well at both high and low temperatures, so it is useful for applications where the bonded structure is exposed to environmental extremes. This is a fire retardant system, and meets requirements of UL-94 Specification.

ES6296
ES6296 is a two component epoxy adhesive intended for use in bonding composite parts and structural assemblies. ES6296 is a very tough adhesive that works well in applications where severe stresses and vibration are involved. It is not brittle when cured, and has very good resistance to peel forces. The mixed material has very good thixotropy, and fills gaps in uneven bond lines without sagging or run out during cure. ES6296 has a high glass transition temperature (Tg), so it is very well suited to applications where good performance at higher temperatures is required.

OC3700
A two-part, room temperature curing epoxy optical cement. OC3700 is recommended for glass to glass bonding, where its low mixed viscosity and room temperature cure allow as much as an hour for close positioning. In addition, its index of refraction and unusually low coefficient of expansion make it especially suited to glass bonding.

TR-150-25
TR-150-25 is a modified reactive polyimide solution designed to provide outstanding high temperature service in a variety of demanding applications. It was originally developed to bond Kapton film to copper for printed circuit applications. Aging studies have shown that TR-150-25 bonds retain 75% of their original strength after more than 4000 hours at temperatures above 500°F. Excellent metal-to-metal bond strength has been observed with properly treated stainledd steel, copper, aluminum and titanium alloys.