 PTMW Products Urethanes
Click on the category below for Selector Guides: Soft Elastomers:
These soft, very flexible materials in the 40 – 50 Shore A hardness range find many uses as shock absorbing bumpers and pads, impact protection devices, deeply undercut flexible molds, and all types of soft, flexible parts. Mid Range Hardness Systems:
These slightly harder elastomers in the 60 – 80 Shore A hardness range perform very well in light metal forming dies such as brake form pads. They make very tough flexible molds, and they produce durable, abrasion resistant flexible parts. Hard Elastomers:
These 95 Shore A and 60 Shore D hardness elastomers are workhorse metal forming materials. In some instances, they can produce successful tooling for forming applications where nothing else works! They are also used extensively in the foundry, where they are capable of outlasting metal patterns in many applications. Rigid Urethanes:
These very hard systems – 75 to 85 Shore D – are plastic-like in appearance, yet provide the inherent toughness and durability of engineering elastomers. They work equally well in tooling, rigid parts fabrication and difficult metal forming jobs. REPLICAST Fast Setting Systems:
Hard, rigid, fast setting general purpose systems for the rapid production of temporary and short-run tooling, various jigs and fixtures, as well as rigid, durable shapes and parts.
| 
