|  PTMW Products Urethanes REPLICAST Fast Setting Systems
Polyurethane elastomers are very versatile materials that are used for a wide variety of industrial applications including high performance tooling, molds, dies and fixtures. They vary in hardness from very soft, elastomeric materials with high elongation to hard, rigid products with extremely tough cured properties. To Download PTM&W Material Safety Data Sheets (MSDS), click here |
Fast Setting General Purpose Materials for Rapid Production of Tooling and Parts | Hardness | Product | Description | Mix Ratio | Working Time | Viscosity | Tensile Strength | Flexural Strength | Compressive
Strength | Product |
| 75 D | REPLICAST 112 | A three component system consisting of a fast-setting resin and hardener and a non-metallic bulk filler. The user can adjust the finished casting properties by varying the amount of bulk filler incorporated into the mix. | 100:100
By Volume
Resin:Hdnr Plus Filler | 10-12 min | 1500-4000 cps** | 2900-4900 psi** | 6000-7600
psi** | 5700-8000
psi** | REPLICAST 112 |
83 D
84 D | REBLICAST 609
REPLICAST 612 | The REPLICAST 600 Series is a line of highly filler fast setting urethane tooling compounds. They have low shrinkage and good cured stability for a wide variety of general purpose industrial tooling applications. REPLICAST 609 has a faster setting time, and castings can be demolded a little sooner than with REPLICAST 612. REPLICAST 612 should be used for larger castings, and when the lowest shrinkage is required. | 100 : 100
100 : 100 | 6 min.
10 min. | 2600 cps
2600 cps | 3030 psi
4500 psi | 6230 psi
6900 psi | 9700 psi
9100 psi | REPLICAST 609
REPLICAST 612 |
** The Actual Values for This Product Are in This Range, and Will Depend Upon The Amount of Bulk Filler Used in The Mix. To help define the hardness values, Click Here to see a cross reference chart that compares the hardness of common rubber and plastic items. 
Printing Tip:
To print this page in full, please use the landscape mode in your printer setting | |
