Surface Preparation is extremely important to the success of any application, so for the Wyn-Stik “Guidelines for Surface Preparation” paper, click here
The Wyn-Stik product line consists of epoxy and polyurethane systems designed for the protection and/or repair of concrete, clay pipe and composite materials in the construction-related industry.
Included in these products are paste and liquid adhesives and repair materials with high bond strengths and the capabilities to adhere to casually prepared surfaces, for quick field repairs.
There are also epoxy and polyurethane coatings and primers for brush, trowel or spray application that have excellent resistance to harsh chemical environments.
These materials have been utilized in the construction industry for many years, and have proven to be reliable, high-performance products that provide years of strength and protection.
Some PTM&W Products have been renumbered. For information on the renumbered products, click here.
To Download PTM&W Material Safety Data Sheets (MSDS), click here
Epoxy Adhesives & Coatings and Urethane Systems for Construction or Repair
Reddish-brown, non-sag epoxy paste system for adhesive bonding and patching of dry concrete, transite, and vitrified clay products. Packaged in 1-pound, single-use premeasured kits for in-field use. Three hardeners are available with different curing speeds to suit the field conditions.
A light tan, smooth paste epoxy system especially suited for difficult bonding problems involving dissimilar materials such as aluminum, steel, concrete, brick, glass, stone, ceramics, tile and wood. One-to-One by weight or volume ratio for ease of use.
Underwater curing paste epoxy system with good bond strengths and excellent resistance to brine and marine exposure. Ideal for repairs to water reservoirs, either underwater or on the surface, drainage ditches, concrete pipe, transite, off-shore drilling rigs, and bonding metal to almost any surface. Equal parts by weight or volume for easy handling and use.
Reddish-brown , two-component epoxy coating for concrete structures or clay pipe. ES6321 is a 100% solids material that is easy to apply by brush or roller, and has excellent water and chemical resistance for good protection of the surface it is applied to. This coating has been approved by the Bureau of Engineering, City of Los Angeles for internal coating of precast concrete sewer manholes.
A non-sag, troweling viscosity version of ES6321 for patching or high-build coating of damp or dry concrete, transite, or vitrified clay products. It has excellent water and chemical resistance for good protection in the harshest environments.
Tan, two-component, sprayable high-build urethane coating for metal or concrete surfaces. Non-sag consistency for easy application to vertical or overhead surfaces. Excellent resistance to water, chemicals and sewer gasses, for outstanding service in the corrosive environment of sanitation systems. A tough flexible coating that resists impact and abrasion. This non-settling formulation resists blistering and pinholing in the most severe applications.
Tan, two-component paste viscosity urethane coating patching compound. Designed for use in repairing US6350 urethane coating, with excellent adhesion to a variety of surfaces. Easy mix, smooth consistency for hand application to vertical or overhead surfaces. Excellent chemical resistance to maintain the original performance of the repaired coating.
Light amber, two-component epoxy penetrating sealer/primer used to enhance the adhesion and performanceof US6350 urethane coating on difficult substrates. ES6375 is a 100% solids material with a low mixed viscosity for easy application by brush or spray. It is used to seal concrete surfaces that cannot be dried sufficiently for adhesion by the urethane coating, and is a primer for properly prepared steel surfaces.
100 : 43 Wt. 2 : 1 Vol.
20 min.
1.1
Shore D-88
<.1 %
6,800 psi
7%
1,050 psi
ES6375
Printing Tip: To print this page in full, please use the landscape mode in your printer setting
PTMW Products 
