Search Our Website :












 PTMW Products    Polyester Filler Pastes 

The PTM&W Poly Filler line of polyester filler pastes are unique high performance products that have been extensively used in a broad range of industrial applications very successfully for many years. These are high quality fillers which use the best raw materials for the purpose. They are smooth viscosity products that are very easy to apply, and exhibit very low shrinkage, for quicker repairs with minimal rework.

To Download PTM&W Material Safety Data Sheets (MSDS), click here

Poly Filler RT



Poly Filler HT

 The Poly Filler products are two-component polyester filler paste systems that have very nice handling characteristics. They have smooth, creamy viscosities that make them easy to mix and gives them the ability to be spread to a very thin feather edge. The high performance resins used in these products exhibit very low cured shrinkage. Therefore, the Poly Filler materials can be used in thicker cross sections, for faster repairs, than with other materials that have to be applied in multiple layers to avoid their higher shrinkage. The cured Poly Filler products bond quite well to a variety of metal and composite surfaces, and they will accept all types of enamel, epoxy, lacquer and paint stains as a surface finish. 

The two Poly Filler products differ in their heat resistance; Poly Filler RT is a white paste intended for applications where the cured material is used in ambient temperatures. Poly Filler HT utilizes a high termperature resin base, so it can be subjected to service temperatures in excess of 400 F. Poly Filler HT is available in gray or black.

In summary, the Poly Filler paste systems should always be used when you need maximum adhesion, lowest shrinkage, and excellent finish retention. If it's a part
you're going to sell, use Poly Filler RT or HT to patch it!

Printing Tip:
To print this page in full, please use the landscape mode in your printer setting